DFM  (Deep and Fast Modulated) generators up to 280 GHz 

Insight Product Company offers DFM (Deep and Fast Modulated) mm-wave sources at frequencies from 30 to 280 GHz. DFM generators are designed to go swiftly from the generation to the non-generation mode and back.  This process controlled by the external TTL signal. ON/OFF switch time is approximately 2 nanoseconds.

In contrast with the PIN modulators, DFM sources  have no residual signal in the "OFF"  position. These advantage makes them uniquely beneficial for the applications in  the MRI,  EPR, Spectroscopy, Plasma Diognostics, MM-wave Imaging, Radars and Communications.

Specifications for DFM Generator at 140 GHz:
 
Frequency 140 GHz
Output  Power  30-40 mW
ON/OFF switch time  2 ns
AM Noise at 100 kHz  offset  less then  –135 dBc/Hz
Frequency stability, per 1 C   (typical)  0.0001
Modulation input  TTL, 50 Ohm
Power  27 V, 250 mA
Size  67*90*40 mm
Weight  0.3 kg
options with electronic frequency tune, phase locking and extremely high frequency stability also available.

  

Contact:

E-mail: admin@insight-product.com
Phone: (617) 965-8151
Fax: (617) 965-2238


                                   Copyright 2019 Insight Product Company